The direct and indirect effects of nanotwin volume fraction on the strength and ductility of coarse-grained metals

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:657

Article

Guo, X.^1,2  Ouyang, Q. D.¹  Weng, G. J.³  Zhu, L. L.⁴ 

[1] Tianjin Univ, Sch Mech Engn, Tianjin 300072, Peoples R China

[2] Tianjin Key Lab Nonlinear Dynam & Chaos Control, Tianjin 300072, Peoples R China

[3] Rutgers State Univ, Dept Mech & Aerosp Engn, New Brunswick, NJ 08903 USA

[4] Zhejiang Univ, Sch Aeronaut & Astronaut, Dept Engn Mech, Hangzhou 310027, Zhejiang, Peoples R China

关键词: Nanotwin;    Volume fraction;    Strain gradient plasticity;    Johnson-Cook failure criterion;    Microstructure;    Twin spacing;   

DOI  :  10.1016/j.msea.2016.01.090

来源: Elsevier

【 摘 要 】

Coarse-grained (CG) metals strengthened by nanotwinned (NT) regions have an excellent combination of high strength and good ductility. In this paper, numerical simulations based on the mechanism-based strain gradient plasticity and the Johnson-Cook failure criterion are carried out to investigate the direct and indirect effects of volume fraction of the NT regions and several other key attributes on the strength and ductility of the CG metal strengthened by NT regions. Our results indicate that twin spacing, shape, distribution, and volume fraction of NT regions all have significant effects, and that, as the volume fraction increases, the roles played by the twin spacing and shape of NT regions also change. At low volume fraction of NT regions, their shape is found to have a significant influence on the overall ductility. As the volume fraction increases, the shape effect on the ductility is found to diminish even though the effect on the strength is noted to continue to enhance. While twin spacing and volume fraction of NT regions have shown different effects on the ductility, the effect of twin spacing always decreases as the volume fraction increases. During the simulations we have also discovered several intrinsic deformation and failure mechanisms through the analysis of microcrack initiation sites and microcrack propagation paths. It is believed that this simulation has revealed significant insights into the roles of volume fraction, twin spacing, shape, and distribution of NT regions on the strength and ductility of this novel class of materials. (C) 2016 Elsevier B.V. All rights reserved.

【 授权许可】

Free