A study of low cycle fatigue life and its correlation with microstructural parameters in IN713C nickel based superalloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:718

Article

Canto, J. Salvat¹  Winwood, S.²  Rhodes, K.²  Birosca, S.¹ 

[1] Swansea Univ, Coll Engn, Mat Res Ctr, Bay Campus, Swansea SA1 8EN, W Glam, Wales

[2] Cummins Turbo Technol, St Andrews Rd, Huddersfield HD1 6RA, W Yorkshire, England

关键词: Fatigue;    IN713C;    Microstructure;    Investment casting;    Superalloy;   

DOI  :  10.1016/j.msea.2018.01.083

来源: Elsevier

【 摘 要 】

Up to date, IN713C Nickel-based superalloy has been continued to be the best alloy candidate for turbocharger wheel applications due to its adequate fatigue property and resistance to degradation under harsh operating environments. Throughout this study, three different batches of as-cast IN713C nickel based superalloys with different microstructures including columnar, equiaxed and transition microstructures were investigated. Strain control Low Cycle fatigue (LCF) tests were conducted for the three different microstructures, achieving fatigue life between 100 and runout at 100,000 cycles, depending on the testing parameters. The fracture mechanics and failure mechanism were correlated to the alloys microstructure, texture and chemical composition under various LCF conditions using optical microscopy, SEM, EDX and EBSD. In the current study an exact correlation between alloys microstructure/microtexture and LCF endurance is established. The results showed that equiaxed microstructure has a superior fatigue life than the transition microstructure by 10% and columnar microstructure by > 200% at a given temperature and strain rate. This large discrepancy was mainly due to the grain size differences between the studied microstructures. Here, it was evidenced that the grain size controls the dendrites length. It is also demonstrated that all microstructures exhibited a longer fatigue life at room temperature than at 650 degrees C, doubling or tripling the fatigue life of the tested IN713C. Furthermore, the high presence of precipitates between dendritic arms in all three microstructures was found to have great influence on crack propagation path. It was apparent that segregated carbides in between dendritic arms caused secondary crack initiation and crack path undulations during the LCF tests.

【 授权许可】

Free