Oxidation of AISI 304 and AISI 439 stainless steels

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:447

Article

Huntz, A. M. ; Reckmann, A. ; Haut, C. ; Severac, C. ; Herbst, M. ; Resende, F. C. T. ; Sabioni, A. C. S.

关键词: oxidation;    AISI 304 stainless steel;    AISI 439 stainless steel;    oxygen;    water vapour;   

DOI  :  10.1016/j.msea.2006.10.022

来源: Elsevier

【 摘 要 】

The oxidation behaviour of AISI 304 and AISI 439 stainless steels was studied at high temperatures, under various oxygen pressures and in the presence or not of water vapour. Thermogravimetric analyses were conducted in isothermal conditions from 850 to 950 degrees C for 50h and microstructural and chemical analyses of the oxide films grown by oxidation were performed by SEM and EDX. The oxide films were also analysed by grazing X-ray diffraction and by X photoelectron spectroscopy (XPS). The AISI 439 steel has higher oxidation resistance than AISI 304, above 850 degrees C, under high oxygen pressures. On the other hand, the AISI 304 steel has higher oxidation resistance under low oxygen pressures in the whole temperature range. In order to check whether the growth kinetics of Cr2O3 formed by the oxidation of stainless steels was controlled by oxygen or/and chromium diffusion through the oxide film, the oxidation constants were theoretically calculated on the basis of diffusion data using Wagner's Theory. The calculated values of the oxidation constants agree reasonably well with experimental values, therefore confirming the role of diffusion processes on the growth of chromia on stainless steels. (c) 2006 Elsevier B.V. All rights reserved.

【 授权许可】

Free