期刊论文详细信息
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 卷:766
Controlled cold rolling effect on microstructure and mechanical properties of Ce-modified SAF 2507 super duplex stainless steel
Article
Zhou, Tian1  Xiong, Yi1,2  Yue, Yun3  Lu, Yan1  Chen, Yan-na1  He, Tian-tian3  Ren, Feng-zhang1,2  Sing, Harishchandra4  Komi, Jukka5  Huttula, Marko1,4  Cao, Wei4,6 
[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang 471023, Henan, Peoples R China
[2] Collaborat Innovat Ctr Nonferrous Met, Luoyang 471023, Henan, Peoples R China
[3] Henan Univ Sci & Technol, Natl United Engn Lab Adv Bearing Tribol, Luoyang 471023, Henan, Peoples R China
[4] Univ Oulu, Nano & Mol Syst Res Unit, FIN-90014 Oulu, Finland
[5] Univ Oulu, Ctr Adv Steels Res, Mat & Mech Engn, FIN-90014 Oulu, Finland
[6] Anhui Polytech Univ, Sch Mech & Automot Engn, Wuhu 241000, Anhui, Peoples R China
关键词: Super duplex stainless steel;    Cold rolling;    Microstructure;    Mechanical properties;    Deformation-induced martensitic;    transformation;   
DOI  :  10.1016/j.msea.2019.138352
来源: Elsevier
PDF
【 摘 要 】

Controlled cold rolling impacts on microstructure and mechanical properties of the rare earth Ce-modified SAF 2507 super duplex stainless steel (SDSS) are investigated towards a better application and development prospective over the pristine SDSS. Rolling was performed at room temperature with the deformation level in a range of 30%-90%. A large amount of dislocations into the ferrite phase turned out, and their density increased with the deformation. While, emergence of dislocation plugs group, ferrite grains get refined to nanometer scale during the deformation process. In addition to deformed bands within austenite, formation of alpha'-martensitic phases and significant increment in their volume fraction are detected and attributed to deformation-induced martensitic transformation. Elongation of the ferrite and austenite microstructures along the deformation direction under the action of high strain also resulted in fibers formation gradually. Correspondingly, significant increase in the strength index while decrement in the plasticity index are observed. Moreover, cold rolling deformation not only affects the tensile fracture morphology but also switches it from a typical ductile to a ductile and quasi-cleavage mixed fracture.

【 授权许可】

Free   

【 预 览 】
附件列表
Files Size Format View
10_1016_j_msea_2019_138352.pdf 5126KB PDF download
  文献评价指标  
  下载次数:37次 浏览次数:1次