Electrolysis-assisted mitigation of reverse solute flux in a three-chamber forward osmosis system

WATER RESEARCH

卷:115

Article

Zou, Shigiang¹  He, Zhen¹ 

[1] Virginia Polytech Inst & State Univ, Dept Civil & Environm Engn, Blacksburg, VA 24061 USA

关键词: Forward osmosis;    Electrolysis;    Reverse solute flux;    In-situ mitigation;    Energy consumption;   

DOI  :  10.1016/j.watres.2017.02.060

来源: Elsevier

【 摘 要 】

Forward osmosis (FO) has been widely studied for desalination or water recovery from wastewater, and one of its key challenges for practical applications is reverse solute flux (RSF). RSF can cause loss of draw solutes, salinity build-up and undesired contamination at the feed side. In this study, in-situ electrolysis was employed to mitigate RSF in a three-chamber FO system (e-FO) with Na2SO4 as a draw solute and deionized (DI) water as a feed. Operation parameters including applied voltage, membrane orientation and initial draw concentrations were systematically investigated to optimize the e-FO performance and reduce RSF. Applying a voltage of 1.5 V achieved a RSF of 6.78 +/- 0.55 mmol m(-2) h(-1) and a specific RSF of 0.138 +/- 0.011 g L-1 in the FO mode and with 1 M Na2SO4 as the draw, rendering similar to 57% reduction of solute leakage compared to the control without the applied voltage. The reduced RSF should be attributed to constrained ion migration induced by the coactions of electric dragging force (>= 1.5 V) and high solute rejection of the FO membrane. Reducing the intensity of the solution recirculation from 60 to 10 mL min(-1) significantly reduced specific energy consumption of the e-FO system from 0.693 +/- 0.127 to 0.022 +/- 0.004 kWh m(-3) extracted water or from 1.103 +/- 0.059 to 0.044 +/- 0.002 kWh kg(-1) reduced reversed solute. These results have demonstrated that the electrolysis-assisted RSF mitigation could be an energy-efficient method for controlling RSF towards sustainable FO applications. (C) 2017 Elsevier Ltd. All rights reserved.

【 授权许可】

Free