Data accuracy on automatic traffic counting: the SMART project results

European Transport Research Review

Original Paper

Patrizia Bellucci¹  Ernesto Cipriani¹ 

[1]Department of Civil Engineering Science, University of “Roma Tre”, Via V. Volterra, 62, 00146, Rome, Italy

关键词: Traffic monitoring devices;    Measurement accuracy;    Validation procedure;   

DOI  :  10.1007/s12544-010-0039-9

 received in 2010-01-08, accepted in 2010-10-06,  发布年份 2010

来源: Springer

【 摘 要 】

In this paper the results of an experimental survey on traffic monitoring devices, named SMART Project, are presented. Aim of the project was to define the requirements to be applied to traffic technologies to match specific applications. The project involved the construction of a test site on a main road, where seven different traffic monitoring systems were installed. A 1 year survey was carried out to assess technologies response to environmental and mechanical solicitations. A reference system specifically devoted to check and validate the devices under test was designed for the project. Test procedures were also developed to control the results achieved. The outcomes accomplished for vehicles counting are described in details in the essay hereunder.

【 授权许可】

CC BY   
© The Author(s) 2010. This article is published under license to BioMed Central Ltd. Open Access This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.