A linear-nonlinear model accurately predicts cortical responses to simultaneous electrical stimulation with a retinal implant

BMC Neuroscience

Poster Presentation

Mohit Shivdasani¹  Hamish Meffin²  Shaun L Cloherty³  Kerry Halupka⁴  Anthony N Burkitt⁵  David B Grayden⁵ 

[1] Bionics Institute, 384-388 Albert St, East Melbourne, Australia;National ICT Australia, Victoria Research Lab, University of Melbourne, Parkville, Australia;Neural Engineering Laboratory, Dept. of Electrical & Electronic Engineering, University of Melbourne, Parkville, Australia;Centre for Neural Engineering Laboratory, University of Melbourne, Parkville, Australia;National Vision Research Institute, Australian College of Optometry, Carlton, Australia;Dept. Optometry and Vision Sciences, University of Melbourne, Parkville, Australia;Neural Engineering Laboratory, Dept. of Electrical & Electronic Engineering, University of Melbourne, Parkville, Australia;Centre for Neural Engineering Laboratory, University of Melbourne, Parkville, Australia;Neural Engineering Laboratory, Dept. of Electrical & Electronic Engineering, University of Melbourne, Parkville, Australia;Centre for Neural Engineering Laboratory, University of Melbourne, Parkville, Australia;National ICT Australia, Victoria Research Lab, University of Melbourne, Parkville, Australia;Bionics Institute, 384-388 Albert St, East Melbourne, Australia;

关键词: Current Pulse;    Electrode Array;    Primary Visual Cortex;    Spike Rate;    Spike Count;   

DOI  :  10.1186/1471-2202-15-S1-P95

来源: Springer

【 授权许可】

Unknown   
© Halupka et al; licensee BioMed Central Ltd. 2014. This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.