Organisation of railway freight transport: case study CIM/SMGS between Slovakia and Ukraine

European Transport Research Review

Original Paper

Vladislav Zitricky¹  Borna Abramović²  Vedran Biškup² 

[1] Faculty of Operation and Economics of Transport and Communications, University of Žilina, Univerzitná 1, 01026, Žilina, Slovakia;Faculty of Traffic and Transport Sciences, University of Zagreb, Vukelićeva 4, 10000, Zagreb, Croatia;

关键词: Railway freight;    Consignment note;    Critical path method;    Slovakia;    Ukraine;   

DOI  :  10.1007/s12544-016-0215-7

 received in 2016-02-22, accepted in 2016-11-02,  发布年份 2016

来源: Springer

【 摘 要 】

PurposeThis paper presents a method for optimising freight traffic procedures on the border between Slovakia (European Union) and Ukraine.BackgroundIn Eastern Europe a considerable volume of goods is usually carried by rail. On the Ukrainian side there is the Chop railway station, the largest entry/exit rail point and on the Slovakian side there is the Čierna nad Tisou railway station. The latter station is on the TEN-T as part of the Rhine-Danube Core Network Corridor. Total railway freight between Slovakia and Ukraine makes around 16 million tonnes per year, which amounts to about 40 % of the entire railway freight transport in Slovakia. The most frequently transported goods are iron, coal and metal. Around 247,000 freight cars are used for transport between Slovakia and Ukraine every year.MethodologyThe most important organisational aspect of transport in this case is the existence of two different procedures. In Slovakia, transport is organised according to the Convention concerning International Carriage by Rail (COTIF), and in Ukraine, transport is organised according to the Agreement on International Goods Transport by Rail (SMGS). Today all procedures are completely manual. This means that transport documentation is rewritten from SMGS to COTIF, or vice versa. This process is very labour-intensive and time-consuming. Following an analysis we performed a case study using the critical path method (CPM) for optimisation of the technological process for transport methodology at the Čierna nad Tisou railway station and we proposed a method for electronic data exchange between the rail and customs authorities of Slovakia and Ukraine.ResultsThe research optimised organisational procedures by using the critical path method (CPM) and introducing electronic data exchange to cut down the whole process by 170 min or 66.7 % of the total time spent at the border station.ConclusionRailway freight transport has a very important role in Eastern Europe, but also in the European Union (EU), so to enable seamless connections there is a need to cut down the time that the freight/wagons spend at the border station. To meet the future demand for transport between the East and West there is a need to introduce electronic data exchange between COTIF and SMGS to achieve a quicker and easier use of freight railways for transport of goods.

【 授权许可】

CC BY   
© The Author(s) 2016

【 图 表 】

12888_2017_1557_Article_IEq4.gif

12888_2017_1557_Article_IEq3.gif

12888_2017_1557_Article_IEq2.gif

12864_2017_3777_Article_IEq23.gif

12864_2017_3487_Article_IEq67.gif

12864_2017_4020_Article_IEq22.gif

12864_2017_3487_Article_IEq66.gif

12864_2017_4132_Article_IEq45.gif