期刊论文详细信息
Frontiers in Bioengineering and Biotechnology
Tensile energy dissipation and mechanical properties of the knee meniscus: relationship with fiber orientation, tissue layer, and water content
Bioengineering and Biotechnology
Alicia R. Jackson1  Thomas M. Best2  Andy Morejon3  Francesco Travascio4  Pedro L. Dalbo5 
[1] Department of Biomedical Engineering, University of Miami, Coral Gables, FL, United States;Department of Biomedical Engineering, University of Miami, Coral Gables, FL, United States;Department of Orthopedic Surgery, University of Miami, Coral Gables, FL, United States;UHealth Sports Medicine Institute, Coral Gables, FL, United States;Department of Mechanical and Aerospace Engineering, University of Miami, Coral Gables, FL, United States;Department of Mechanical and Aerospace Engineering, University of Miami, Coral Gables, FL, United States;Department of Orthopedic Surgery, University of Miami, Coral Gables, FL, United States;Max Biedermann Institute for Biomechanics at Mount Sinai Medical Center, Miami Beach, FL, United States;School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, United States;
关键词: mechanics;    quasi-static;    dynamic modulus;    strength;    viscoelasticity;    surface layers;   
DOI  :  10.3389/fbioe.2023.1205512
 received in 2023-04-13, accepted in 2023-05-22,  发布年份 2023
来源: Frontiers
PDF
【 摘 要 】

Introduction: The knee meniscus distributes and dampens mechanical loads. It is composed of water (∼70%) and a porous fibrous matrix (∼30%) with a central core that is reinforced by circumferential collagen fibers enclosed by mesh-like superficial tibial and femoral layers. Daily loading activities produce mechanical tensile loads which are transferred through and dissipated by the meniscus. Therefore, the objective of this study was to measure how tensile mechanical properties and extent of energy dissipation vary by tension direction, meniscal layer, and water content.Methods: The central regions of porcine meniscal pairs (n = 8) were cut into tensile samples (4.7 mm length, 2.1 mm width, and 0.356 mm thickness) from core, femoral and tibial components. Core samples were prepared parallel (circumferential) and perpendicular (radial) to the fibers. Tensile testing consisted of frequency sweeps (0.01–1Hz) followed by quasi-static loading to failure. Dynamic testing yielded energy dissipation (ED), complex modulus (E*), and phase shift (δ) while quasi-static tests yielded Young’s Modulus (E), ultimate tensile strength (UTS), and strain at UTS (εUTS). To investigate how ED is influenced by the specific mechanical parameters, linear regressions were performed. Correlations between sample water content (φw) and mechanical properties were investigated. A total of 64 samples were evaluated.Results: Dynamic tests showed that increasing loading frequency significantly reduced ED (p < 0.05). Circumferential samples had higher ED, E*, E, and UTS than radial ones (p < 0.001). Stiffness was highly correlated with ED (R2 > 0.75, p < 0.01). No differences were found between superficial and circumferential core layers. ED, E*, E, and UTS trended negatively with φw (p < 0.05).Discussion: Energy dissipation, stiffness, and strength are highly dependent on loading direction. A significant amount of energy dissipation may be associated with time-dependent reorganization of matrix fibers. This is the first study to analyze the tensile dynamic properties and energy dissipation of the meniscus surface layers. Results provide new insights on the mechanics and function of meniscal tissue.

【 授权许可】

Unknown   
Copyright © 2023 Morejon, Dalbo, Best, Jackson and Travascio.

【 预 览 】
附件列表
Files Size Format View
RO202310102527859ZK.pdf 1353KB PDF download
  文献评价指标  
  下载次数:1次 浏览次数:0次