Low-temperature partial oxidation of methane over Pd-Ni bimetallic catalysts supported on CeO2

卷:48

Article

关键词: SYNTHESIS GAS-PRODUCTION;    CARBON-MONOXIDE;    SITES;    CONVERSION;    CERIA;    PERFORMANCE;    COMBUSTION;    STABILITY;    FUELS;   

DOI  :  10.1016/j.ijhydene.2022.07.020

来源: SCIE

【 摘 要 】

Monometallic Pd and Ni and bimetallic Pd-Ni catalysts supported on CeO2 are prepared via mechanochemical and conventional incipient wetness impregnation methods and tested for the production of syngas by the partial oxidation of methane. Compared with monometallic Ni/CeO2 and Pd/CeO2, bimetallic Pd-Ni/CeO2 catalysts show considerable higher methane conversion and syngas yield. Additionally, the bimetallic catalysts prepared by ball milling produce syngas at lower temperature. Different preparation parameters, such as metal loading, Pd/Ni ratio, milling energy, milling time and order of incorporation of the metals are examined. The best performance is obtained with a bimetallic catalyst prepared at 50 Hz for 20 min with only 0.12 wt% Pd and 1.38 wt% Ni. Stability tests demonstrate superior stability for bimetallic Pd-Ni/CeO2 catalysts prepared by a mechanochemical approach. From the characterization results, this is explained in terms of an impressive dispersion of metal species with a strong interaction with the surface of CeO2.(c) 2022 The Author(s). Published by Elsevier Ltd on behalf of Hydrogen Energy Publications creativecommons.org/licenses/by-nc-nd/4.0/).

【 授权许可】

Free