A non-linear model predictive control strategy to minimise mechanical effects of lithium-ion

卷:71

Article

关键词: SOLID-ELECTROLYTE INTERPHASE;    CYCLE LIFE;    NUMERICAL-SIMULATION;    STRESS GENERATION;    BATTERIES;    DEGRADATION;    CALENDAR;    OPTIMIZATION;    FRACTURE;    SPINEL;   

DOI  :  10.1016/j.est.2023.108050

来源: SCIE

【 摘 要 】

Mechanical stresses are not only developed inside the active material of the composite electrode, but also in the solid electrolyte interface layer (SEI) due to the graphite expansion. Due to diffusion induced stress (DIS) phenomena, stresses in the negative electrode are generated during charging and discharging cycles. This article presents the proposed optimal charging profile explicitly incorporating the effects of mechanical degradation. Non-linear model predictive control approach along with Gauss pseudo-spectral method is used to optimise charging trajectories. It is assumed that active material is not the weakest material but system is modelled based on SEI break and repair effect. The dynamics of battery is represented by a single particle model. The simulated results are compared with benchmark constant current constant voltage (CCCV) strategy. Furthermore, proposed methodology is compared with optimal CCCV using cycle life ageing experimental scenario. It is estimated that stress amplitude decreased by 7% and nominal capacity increased by 11% using the proposed optimal charging profile.

【 授权许可】

Free