Damping property of a NiTi auxetic structure fabricated through selective laser melting

Article; Early Access

关键词: NEGATIVE POISSONS RATIO;    MEMORY;    WIRE;   

DOI  :  10.1007/s00170-023-11106-9

来源: SCIE

【 摘 要 】

The present work aims at studying the damping response of a NiTi auxetic structure fabricated through additive manufacturing. Furthermore, an electropolishing route has been accounted for improving the roughness on the external surface of the printed samples. The damping capacity of the manufactured auxetic NiTi components is evaluated through the amount of energy dissipated per cycle and through the loss factor index. Results show that the damping capacity of the auxetic NiTi cell takes advantage of electropolishing and it is superior to that of traditional materials. Particularly, a maximum dissipated energy of 55 mJ was registered in the austenite state after 10 min of electropolishing; additionally, the loss factor shows a maximum of 0.0523 in the R-phase.

【 授权许可】

Free