Are tungsten-based nuclear fusion components truly invisible to x-ray inspection?

Nuclear Fushion

article

Triestino Minniti¹  Heather Lewtas¹ 

[1] UKAEA-United Kingdom Atomic Energy Authority, Culham Science Centre

关键词: divertor target;    tungsten;    thermal break;    CuCrZr;    x-ray tomography;    non-destructive evaluation;    qualification;   

DOI  :  10.1088/1741-4326/ac4efe

来源: Institute of Physics Publishing Ltd.

【 摘 要 】

The ability to detect undesired volumetric defects in reactor components could affect the safety and reliability of a fusion power plant and change the expected lifetime and performance of the reactor. This is even more true for critical reactor parts like plasma-facing components (PFCs) which have to withstand challenging in-vessel conditions due to a combination of plasma bombardment, radiation, and nuclear heating. The structural integrity of these components prior to their installation in a nuclear fusion reactor needs to be assessed non-destructively. Until now, industrial x-ray radiography and tomography have not been used to non-destructively inspect fusion components due to their lack of penetration power into dense material such as tungsten which is often used to manufacture PFCs. However, aiming to revert this consolidated belief, we have demonstrated for the first time the feasibility of assessing volumetric defects non-destructively on DEMO divertor mock-up by means of MeV energy range x-ray tomography. The authors believe that the application of this technology could be easily extended for inspecting large fusion components and positively impact procedures to be followed in the qualification of fusion components for current and future nuclear reactors.

【 授权许可】

Unknown