Life Cycle Analysis of the Embodied Carbon Emissions from 14 Wind Turbines with Rated Powers between 50 Kw and 3.4 Mw

Journal of Fundamentals of Renewable Energy and Applications

article

Emily A. Smoucha¹  Kate Fitzpatrick²  Sarah Buckingham³  Oliver G.G. Knox⁴ 

[1] School of Geosciences, Edinburgh University;Waste and Recycling, Edinburgh University;Crop and Soil Systems, Scotland’s Rural College;Department of Agronomy and Soil Science, University of New England

关键词: Wind turbines;    Embodied energy;    Manufacture;    Transport;    Installation;    Carbon;   

DOI  :  10.4172/2090-4541.1000211

来源: Ashdin Publishing

【 摘 要 】

In order to facilitate increased renewable energy production, there continues to be a global increase in wind turbine installation. When quantifying the carbon offsets from these installations, the production emissions are rarely accounted for. This paper reports on the embodied carbon emissions from the production of 14 wind turbines, rated between 50 kW and 3.4 MW. The embodied emissions were quantified from emission factors specific to each material involved in manufacture, transport to site, and installation of the turbines. The resulting trend was that higher-rated turbines had greater embodied carbon emissions with one 3 MW turbine incorporating 1046 tCO2eq compared to only 58 tCO2eq for an 80 kW turbine. However, the greater electricity output of the turbines offset these emissions more quickly with a recovery in 64 days for a 3.4 MW turbine compared to 354 days for a 100 kW one. This also resulted in lower carbon emissions per kilowatt hour of electricity generated and quicker payback as a percentage of lifetime of 0.9% for a 3.4 MW turbine compared to 4.3% and 4.9% for a 50 and 100 kW turbines, respectively. The findings of this analysis indicate that a preference for installation of higher-rated, over lower-rated, turbines should be favoured for greater environmental benefits.

【 授权许可】

Unknown