ZIGBEE based Wireless Monitoring andControlling of Automation System using PLC & SCADA

International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering

article

Vara Manthan Kantila¹  Anurag P Lakhlani¹ 

[1]Dept. Of ECE, Marwadi Education Foundation’s Faculty of P.G. Studies & Research in Engineering & Technology

关键词: Wireless;    PLC;    ZIGBEE;    SCADA;    Automation System;   

来源: Research & Reviews

【 摘 要 】

Main aim behind this project is to monitor and control the PLC based system using wireless technology. In this project I am going to use a ZIGBEE and SCADA technology to get wireless automation system. Pair of ZIGBEE is used here, among that one is connected with the PLC in the industry side and another one is connected with PC in the control room. Data from the PLC side will be transferred continuously to PC via ZIGBEE by sending a bit of the process that occurs in the industry and it will be displayed in the SCADA software and also we can control industry by transmitting a bit again using ZIGBEE from PC side to PLC located at the industry side. Thus we can avoid the maintenance and cost of the long cables that are used to connect the PLC with a PC.

【 授权许可】

Unknown