DETERMINATION OF POROSITY-PERMEABILITY CORRELATION WITH PRESSURE AND DEPTH IN PART OF NIGER DELTA BASIN, NIGERIA

Earth Science Malaysia

article

Chukwu C. Ben¹  Tamunobereton-ari I.¹  Horsfall I. Opiriyabo¹ 

[1] Department of Physics, Faculty of Science, Rivers State University

关键词: Porosity;    Permeability;    Overburden pressure;    Lithology;    Well log;   

DOI  :  10.26480/esmy.02.2021.114.121

学科分类：地球科学(综合)

来源: Zibeline International

【 摘 要 】

Porosity indicates the potentiality or fluid storage capacity of a reservoir or rock. It is the first of the two essential attributes of a reservoir. Permeability is a parameter for the recovery of hydrocarbon from the reservoir, it is required for proper reservoir evaluation, as it aids in the estimation of how much fluid can produced from the reservoir. The aim of this study is to determine porosity-permeability correlation with pressure and depth in part of Niger Delta basin using well log data. A suite of geophysical well logs comprising of gamma ray, neutron, density, spontaneous potential and sonic logs from four oil wells were used in the study. Porosity values were estimated from well log data, while permeability and pressure values were determined using empirical relations with respect to specific depth in the wells. The results of this work show that three reservoirs (reservoir sands) were identified and correlated across the four wells, each reservoir sand unit spread across the wells and differs in thickness ranging from 8ft to 155ft, with some unit occurring at greater depth than their corresponding unit.The lithostratigraphic correlation section of the wells revealed a sand – shale sequence which is a characteristic of a typical Niger Delta formation. The average porosity, permeability, pressure and depth values for the four wells range from 0.001 to 0.309, 34.999mD to 306.360mD, 61926.863psi to 109928.054psi and 3000ft to 4450ft respectively. The analysis of the wells show that wells OTIG9 and OTIG11 have better reservoirs indicating high potentiality and productivity due to their more porous and permeable nature, reflecting well sorted coarse grained sandstone and linearity in the relationship between porosity, permeability, pressure and depth. The reservoir of well OTIG7 is the least porous but most permeable, thus is highly productive but less potential. The reservoir of OTIG2 has moderate potentiality and good productivity, hence is said to have average production capacity. The results of this work can be used as an evaluation tool for reservoir engineering activities, structural engineering, well stability analysis, blowout and lost circulation prevention.

【 授权许可】

CC BY