Influence of chemical pore-clearing method on infiltration rates of pervious asphalt concrete pavement

Materia

article

Lihua Zhao¹  Ziyu Bai²  Bin Xu³  Liang Gao¹  Yaoyu Wang⁴ 

[1] Beijing Jiaotong University;Chongqing Jiaotong University;Ministry of Transport Research Institute of Highways;Dalian University

关键词: Pervious asphalt concrete;    Chemical pore-clearing methods;    Infiltration rate;    Environmental product;   

DOI  :  10.1590/1517-7076-RMAT-2022-0207

学科分类：工程和技术（综合）

来源: Universidade Federal do Rio de Janeiro * Coordenacao dos Programas de Pos-Graduacao de Engenharia

【 摘 要 】

Pervious asphalt concrete (PAC) pavement is an environmentally friendly type of pavement due to its highly porous structure. However, with the increase in the service life of PAC, small substances such as damaged rubber particles, industrial dust, sand, and grease collected in rainwater infiltrate the voids of PAC so that it loses its original pervious structure and functions. In order to explore the effects of chemical pore-clearing methods on the infiltration rate of blocked PAC pores in the present study, chemical agents such as sodium hydroxide solution (H2O2) and hydrogen peroxide (NaOH) solution were used to rinse the voids in PAC specimens obtained from field sampling and laboratory preparation. The effectiveness of different chemical pore-clearing methods in restoring the permeability and stability of PAC was evaluated by water infiltration rate measurements, Cantabro abrasion tests, and CT scanning. The results showed that the capability of H2O2 solution to restore PAC porosity was greater than that of tap water and NaOH solution, especially when the H2O2 content in the solution was 6%. In addition, the decomposition products of H2O2 are oxygen and water, which are environmentally friendly products, this method proved highly effective in preventing groundwater contamination from pavement-cleansing chemical solutions.

【 授权许可】

CC BY