期刊论文详细信息
Archives of civil engineering
Experimental and numerical investigations of laminated veneer lumber panels
article
Marcin Chybiński1  Łukasz Polus1 
[1] Poznan University of Technology, Faculty of Civil and Transport Engineering
关键词: laminated veneer lumber;    finite element analysis;    engineered wood products;    timber structures;    composite structures;    Hashin damage model;   
DOI  :  10.24425/ace.2021.138060
学科分类:建筑学
来源: Polska Akademia Nauk * Instytut Podstawowych Problemow Techniki / Polish Academy of Sciences, Institute of Fundamental Technological Research
PDF
【 摘 要 】

This paper presents a study of laminated veneer lumber panels subjected to bending. Laminated veneer lumber (LVL) is a sustainable building material manufactured by laminating 3-4-mm-thick wood veneers, using adhesives. The authors of this article studied the behaviour of type R laminated veneer lumber (LVL R), in which all veneers are glued together longitudinally – along the grain. Tensile, compressive and bending tests of LVL R were conducted. The short-term behaviour, load carrying-capacity, mode of failure and load-deflection of the LVL R panels were investigated. The authors observed failure modes at the collapse load, associated with the delamination and cracking of veneer layers in the tensile zone. What is more, two non-linear finite element models of the tested LVL R panel were developed and verified against the experimental results. In the 3D finite element model, LVL R was described as an elastic-perfectly plastic material. In the 2D finite element model, on the other hand, it was described as an orthotropic material and its failure was captured using the Hashin damage model. The comparison of the numerical and experimental analyses demonstrated that the adopted numerical models yielded the results similar to the experimental results.

【 授权许可】

Unknown   

【 预 览 】
附件列表
Files Size Format View
RO202307050000216ZK.pdf 10602KB PDF download
  文献评价指标  
  下载次数:43次 浏览次数:3次