Investigating the Factor of Safety for the Design of Columns Using Properties of Steel Rebar’s Manufactured in Pakistan

Archives of civil engineering

article

Safdar Abbas Zaidi¹  Muhammad Arsalan Saeed²  Farhan Haider² 

[1] NED University of Engineering & Technology, Department of Civil Engineering;Sir Syed University of Engineering & Technology, Faculty of Civil Engineering

关键词: Strength reduction factor;    Strength analysis;    Load moment interaction;   

DOI  :  10.24425/ace.2020.135209

学科分类：建筑学

来源: Polska Akademia Nauk * Instytut Podstawowych Problemow Techniki / Polish Academy of Sciences, Institute of Fundamental Technological Research

【 摘 要 】

This paper includes the behaviour of RC column, using the steel strength data employed by Rafi et al. (2014). Eccentric short columns are studied for this purpose, both tension and compression controlled sections, are analysed considering the current design practice of Pakistan. Three cross sections were analysed using different steel percentages against load-moment interaction and the strength analyses. Concrete strength is also varied in this analysis. The load moment interaction diagrams were observed in major and minor axes and strength analysis is made for compression controlled and tension controlled sections. In this analysis it is observed that a section designed as a tension controlled is giving brittle failure at certain limit which should be avoided. Considering this scenario, several random cross sections are analysed, strength reduction factors for eccentric and pure axial columns are computed. Conclusions are made on behalf of this analysis for different types of column design.

【 授权许可】

Unknown