Combined Effects of Polyamide Microplastics and Hydrochemical Factors on the Transport of Bisphenol A in Groundwater

Separations

article

Zhou Cheng¹  Xuanhao Lin¹  Ming Wu¹  Guoping Lu¹  Yanru Hao¹  Cehui Mo¹  Qusheng Li⁵  Jianfeng Wu³  Jichun Wu³  Bill X. Hu⁶ 

[1] Guangdong Provincial Research Center for Environment Pollution Control and Remediation Materials, College of Life Science and Technology, Jinan University;Guangdong Provincial Academy of Environmental Science;Key Laboratory of Surficial Geochemistry, Department of Hydrosciences, School of Earth Sciences and Engineering, Ministry of Education, Nanjing University;Guangdong Yixin Ecological Technology Co., Ltd.;Guangdong Key Laboratory of Environmental Pollution and Health, School of Environment, Jinan University;School of Water Conservancy and Environment, University of Jinan

关键词: bisphenol A;    microplastics;    adsorption;    transport;    polyamide;    kinetic parameter;   

DOI  :  10.3390/separations10020123

学科分类：社会科学、人文和艺术（综合）

来源: mdpi

【 摘 要 】

Polyamide (PA) and bisphenol A (BPA) are selected as typical microplastic and endocrine-disrupting chemicals in this study. The adsorption of BPA on the surface of PA and the effect of PA on the transport behavior of BPA in groundwater are systematically investigated using a combination of batch experiments, column experiments and numerical models. The results of scanning electron microscope (SEM) and Fourier transform infrared spectra (FTIR) show that the surface of PA particles is changed significantly after adsorption of BPA. The isothermal adsorption process of BPA can be simulated by the Langmuir model and the Freundlich model. Kinetic adsorption, on the other hand, can be fitted by a quasi-first-order adsorption model, and the adsorption results indicate that the maximum adsorption of BPA on PA reaches 13 mg·g−1. The results of the column experiments suggest that the mass recovery rate of BPA decreases with PA content, and increases with flow velocity, while initial concentration has no apparent influence on BPA transport. In addition, due to the hydrolysis of BPA, the mass recovery rate of BPA does not change with pH under conditions of pH 10.2. Moreover, Ca2+ has a significant inhibitory effect on the transport of BPA, while Na+ has no apparent influence on the transport of BPA. The transport process of BPA in porous media is simulated using a single-point kinetic model, and the fitted mathematical relationships for the variation of kinetic parameters with environmental factors are obtained by regression analysis.

【 授权许可】

CC BY