Analysis of the Possibility of Using Vibration Parameters for Diagnostics of Selected Defects in Welded Joints of the Hull Plating Elements

Journal of KONBiN

article

Tomasz Muchowski¹  Adam Szeleziński¹  Lech Murawski¹  Adam Muc¹  Marcin Kluczyk² 

[1] Gdynia Maritime University;Polish Naval Academy

关键词: Vibrations;    defects detection;    welded joints;   

DOI  :  10.2478/jok-2022-0030

学科分类：工程和技术（综合）

来源: Instytut Techniczny Wojsk Lotniczych / Air Force Institute of Technology

【 摘 要 】

The article presents results of vibration tests of thin-walled plates used in shipbuilding for plating hulls of vessels. The conducted tests were aimed at determining the possibility of using measurements of vibration acceleration recorded on the tested objects as parameters enabling the detection of damages in the performed welded joints. Seven plates were compared, six of which had joints in different technical conditions, and one was a board without a weld. The quality of the welds was verified using X-ray methods. The adopted research methodology and the obtained results were presented.

【 授权许可】

Unknown