A direct-methane fuel cell with a ceria-based anode

Article

关键词: HIGH-PERFORMANCE;    DIRECT OXIDATION;    LOW-TEMPERATURE;    LAYERS;   

DOI  :  10.1038/23220

来源: SCIE

【 摘 要 】

Fuel cells constitute an attractive power-generation technology that converts chemical energy directly and with high efficiency into electricity while causing little pollution. Most fuel cells require hydrogen as the fuel, but viable near-term applications will need to use the more readily available hydrocarbons, such as methane. Present-day demonstration power plants and planned fuel-cell electric vehicles therefore include a reformer that converts hydrocarbon fuel into hydrogen. Operating fuel cells directly on hydrocarbons would obviously eliminate the need for such a reformer and improve efficiency. In the case of polymer-electrolyte fuel cells, which have been studied for vehicle applications, the direct use of methanol fuel has been reported, but resulted in fuel permeating the electrolyte(1,2). Solid oxide fuel cells-promising candidates for stationary power generation-can also use hydrocarbon fuel directly to generate energy, but this mode of operation resulted in either carbon deposition at high temperatures or poor power output at low operating temperatures(3-5). Here we report the direct electrochemical oxidation of methane in solid oxide fuel cells that generate power densities up to 0.37W cm(-2) at 650 degrees C. This performance is comparable to that of fuel cells using hydrogen(6,7) and is achieved by using ceria-containing anodes and low operating temperatures to avoid carbon deposition. We expect that the incorporation of more advanced cathodes would further improve the performance of our cells, making this:solid oxide fuel cell a promising candidate for practical and efficient fuel-cell applications.

【 授权许可】

Free