Bin-scanning: Segmentation of X-ray CT volume of binned parts using Morse skeleton graph of distance transform

Computational Visual Media

Research Article

Tatsuya Yatagawa¹  Yutaka Ohtake¹  Hiromasa Suzuki¹  Yuta Yamauchi¹ 

[1] School of Engineering, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, Japan;

关键词: X-ray computed tomography (CT);    volume segmentation;    graph matching;    nondestructive inspection;   

DOI  :  10.1007/s41095-022-0296-2

 received in 2022-03-16, accepted in 2022-05-28,  发布年份 2022

来源: Springer

【 摘 要 】

X-ray CT scanners, due to the transmissive nature of X-rays, have enabled the non-destructive evaluation of industrial products, even inside their bodies. In light of its effectiveness, this study introduces a new approach to accelerate the inspection of many mechanical parts with the same shape in a bin. The input to this problem is a volumetric image (i.e., CT volume) of many parts obtained by a single CT scan. We need to segment the parts in the volume to inspect each of them; however, random postures and dense contacts of the parts prohibit part segmentation using traditional template matching. To address this problem, we convert both the scanned volumetric images of the template and the binned parts to simpler graph structures and solve a subgraph matching problem to segment the parts. We perform a distance transform to convert the CT volume into a distance field. Then, we construct a graph based on Morse theory, in which graph nodes are located at the extremum points of the distance field. The experimental evaluation demonstrates that our fully automatic approach can detect target parts appropriately, even for a heap of 50 parts. Moreover, the overall computation can be performed in approximately 30 min for a large CT volume of approximately 2000×2000×1000 voxels.

【 授权许可】

CC BY   
© The Author(s) 2022

【 图 表 】

40798_2022_490_Article_IEq44.gif