Touch Hand 4.5: low-cost additive manufacturing prosthetic hand participated in Cybathlon 2020 ARM discipline

Journal of NeuroEngineering and Rehabilitation

Research

Jode Fourie¹  Zaahid Imran¹  William Rall¹  Clive Hands¹  Kashreya Moodley²  Riaan Stopforth² 

[1] Advanced Engineering Design Group, Nelson Mandela University, Port Elizabeth, South Africa;Stopforth Mechatronics, Robotics Research Lab, University of KwaZulu-Natal, Durban, South Africa;

关键词: Prosthetic hand;    Cybathlon;    Touch Hand;    Additive manufacturing;    Low cost;   

DOI  :  10.1186/s12984-022-01112-5

 received in 2021-10-01, accepted in 2022-11-17,  发布年份 2022

来源: Springer

【 摘 要 】

BackgroundThe Touch Hand 4.5 is a highly customisable prosthetic hand, which features an optimised modular design of the Touch Hand 4. The Touch Hand team has developed a low-cost prosthetic hand, which has been built using an additive manufacturing process. The functionality and features are discussed that are crucial for amputees.MethodsThis paper documents the design and integration of the Touch Hand 4.5 to be used in the Cybathlon 2020 event as well as the development of the mechanical structure of the hand, socket, electronics and control system utilized. The Touch Hand 4.5 was designed and continuously optimized, with the goal to achieve the tasks in the Cybathlon 2020 event.ResultsThe performance and functionality of the Touch Hand 4.5 was tested on a global scale at the Cybathlon 2020. The device and technology were evaluated against the leading prosthetics and prototypes from around the world. A series of everyday tasks, as set by the Cybathlon event, were performed to determine the capabilities of the device, with the pinch grip, full grip, half grip, and a thumb grip. The Touch Hand team was the only team to complete the Haptic Box task in all three races, which comprised of the identification of objects without the aid of visual input or perception, with a duration between 100 and 120 s. The Breakfast task entailed completing a series of everyday breakfast tasks, such as cutting a loaf of bread, lighting a candle, opening a sugar packet, opening a plastic bottle and a jar, as well as opening a tin can with a can opener. This task was only completed in Race 3, with a duration of 132 s, due to a faulty equipment that was supplied.ConclusionThe first contribution that was achieved was the design and development of an additive manufactured hand and socket, considering the socket to have comfort, breathability and decreased irritability. The second contribution was the design optimisation with the linear actuator integration, for a multi-grip hand, which allowed for the pinch grip, full grip, half grip, and a thumb grip. Slippage prevention with grip force control system integration was also implemented.Trial registration number: Ethical clearance certificate HCC/0161/011.

【 授权许可】

CC BY   
© The Author(s) 2022

【 图 表 】

Fig. 4

Fig. 2

12864_2022_9026_Article_IEq78.gif

Fig. 2

Fig. 1

Fig. 3

Fig. 4

Fig. 1

Fig. 1

Fig. 1

Fig. 1

12864_2022_9026_Article_IEq59.gif

12864_2022_9026_Article_IEq57.gif

12864_2022_9026_Article_IEq55.gif

Fig. 6

41408_2022_764_Article_IEq31.gif