Sandwich composite of aluminum alloy and magnesium alloy through accumulative roll bonding technique

Metallurgical & Materials Engineering

article

J Aishwarya¹  M. Nithin Kumaar¹  Vaira Vignesh Ramalingam¹  M Govindaraju¹ 

[1] Department of Mechanical Engineering, Amrita School of Engineering

关键词: lightweight;    sandwich composite;    accumulative roll bonding;    diffusion layer;    fractography;   

DOI  :  10.30544/761

学科分类：医学（综合）

来源: Association of Metallurgical Engineers of Serbia

【 摘 要 】

Aluminum and magnesium alloys are lightweight materials with outstanding technical uses. Due to their combined qualities, composites built of aluminum and magnesium alloys have surpassed the utilization of these elements individually. Accumulative Roll Bonding was used to create a three-layered sandwich composite structure made of Al-alloy/Mg-alloy/Al-alloy. The composite structure's microstructure and mechanical characteristics were studied. A fine-grained AZ31 layer was formed, according to the microstructural study. At the Al-alloy/Mg-alloy contact, a diffusion layer was also seen. On the broken surface, fractography exhibited both ductile and brittle failure characteristics.

【 授权许可】

CC BY