期刊论文详细信息
Advanced Composites Letters
Mechanical Properties of Short and Continuous Kenaf/Pet Fibre Reinforced Polyoxymethylene Composite
Article
Puteri Sri Melor Megat Yusoff1  Mohamad Zaki Abdullah1  Yakubu Dan-mallam2 
[1] Department of Mechaninacl Engineering, Universiti Teknologi PETRONAS, Badar Seri Iskanadr, 31750 Tronoh, Perak, Malaysia;Mechanical Engineering Program, School of Mechatronics Engineering, Universiti Malaysia Perlis, Pauh Putra Campus, 02600 Arau, Perlis, Malaysia;
关键词: Natural fibres;    mechanical properties;    hybrid composites;    morphology;   
DOI  :  10.1177/096369351502400404
来源: Sage Journals
PDF
【 摘 要 】

The challenges of improving the mechanical properties of natural fibre composites cannot be over emphasized due to fibre geometry, poor fiber distribution in the matrix, the hydrophilic nature of natural fibers and poor fibre–matrix interfacial adhesion. The primary objective of this research is to study the influence of fibre length on mechanical properties of kenaf/PET fibre reinforced POM and to study the effect of hybridization on mechanical properties of the composites. The composites were produced by compression molding and subsequently subjected to tensile, flexural and impact tests according to their respective ASTM standards. The tensile strength of short POM/kenaf/PET (80/10/10) hybrid composite dropped by approximately 33% from 61.8 MPa to 41.3 MPa compared to neat POM. However, the tensile strength of continuous POM/kenaf composites increased significantly by approximately 127% and 107% for 70/30 and 80/20 compositions compared to neat POM. The flexural moduli of short POM/kenaf/PET (70/15/15) hybrid composite and continuous POM/kenaf (70/30) composite improved by approximately 41% and 29%, respectively. The impact strength substantially increased by nearly 161% in continuous POM/kenaf/PET (70/15/15) hybrid composite and 30% in POM/kenaf (80/20) composite. The results show that tensile, flexural and impact properties of the continuous POM/kenaf composites are superior to the short fiber composites, and the influence of hybridization, made a positive impact by enhancing the flexural and impact properties of the composites.

【 授权许可】

Unknown   
© 2015 SAGE Publications Ltd

【 预 览 】
附件列表
Files Size Format View
RO202212202106659ZK.pdf 951KB PDF download
Figure 1. 76KB Image download
Figure 1 132KB Image download
Figure 2. 92KB Image download
Figure 1 21KB Image download
Table 1. 479KB Table download
Figure 4. 103KB Image download
Table 3. 66KB Table download
Figure 3. 65KB Image download
Figure 1. 568KB Image download
Table 1 310KB Table download
Figure 3. 57KB Image download
Table 1. 204KB Table download
Table 5. 415KB Table download
Figure 1. 469KB Image download
Figure 5 45KB Image download
Table 3. 514KB Table download
Table 1. 575KB Table download
【 图 表 】

Figure 5

Figure 1.

Figure 3.

Figure 1.

Figure 3.

Figure 4.

Figure 1

Figure 2.

Figure 1

Figure 1.

【 参考文献 】
  • [1]
  • [2]
  • [3]
  • [4]
  • [5]
  • [6]
  • [7]
  • [8]
  • [9]
  • [10]
  • [11]
  • [12]
  • [13]
  • [14]
  • [15]
  • [16]
  • [17]
  • [18]
  • [19]
  • [20]
  • [21]
  • [22]
  • [23]
  • [24]
  • [25]
  • [26]
  • [27]
  • [28]
  • [29]
  • [30]
  文献评价指标  
  下载次数:0次 浏览次数:0次