The possibility of measuring the dynamic response of structures using non-contact geodetic method

Geodetski Vestnik

Tomaž Motoh¹  Boštjan Kovačič² 

[1] Q Techna, Inštitut za zagotavljanje in kvaliteto kontrole Cvetkova ulica 27, SI-1000 Ljubljana, Slovenia;University of Maribor, Faculty of Civil Engineering, Transportation Engineering and Architecture, Smetanova ulica 17, SI-2000 Maribor, Slovenia;

关键词: geodesy;    engineering geodesy;    civil engineering;    dynamic response of the structure;    robotic total station;   

DOI  :  10.15292/geodetski-vestnik.2019.01.57-72

来源: DOAJ

【 摘 要 】

Building construction is the subject of various factors and their consequences must be regularly monitored; this can be carried out in the form of control measurements or monitoring. This article aims to show the usability of geodetic non-contact methods in defining the dynamic response of structures. The lamella on which various methods for monitoring the dynamic response was used for simulation; the emphasis is on a modern geodetic method using a Robotic Total Station (RTS). To determine the dynamic response, the algorithm for the determination of the harmonic oscillation´s average amplitude and the methods of the spectral analysis of the sampled data is further described. The results obtained with the RTS method have shown a high level of reliability for the determination of dynamic response.

【 授权许可】

Unknown