Prediction of Shear Strength of Reinforced High-Strength Concrete Beams Using Compatibility-Aided Truss Model

Applied Sciences

Sang-Woo Kim¹ 

[1] Department of Civil, Architectural and Environmental System Engineering Graduate School, Sungkyunkwan University, Suwon 16419, Korea;

关键词: high-strength concrete;    shear;    shear strength;    truss model;    RC beams;   

DOI  :  10.3390/app112210585

来源: DOAJ

【 摘 要 】

This study proposes an analytical model applicable to the shear analysis of reinforced high-strength concrete beams. The proposed model satisfies the equilibrium and compatibility conditions and constitutive laws of the materials. The proposed model is based on the fixed angle theory and allows the principal stress to rotate as the load increases, so that the RC beams can be analyzed more realistically. High-strength material models were used in the proposed model to consider the characteristics of high-strength concrete. The concrete shear contribution at crack surfaces was calculated from Mohr’s circle. The proposed model considers the effect of bending moment on shear by reducing the amount of longitudinal reinforcement resisting shear. To verify the accuracy of the proposed model, a total of 64 experimental results were collected from the literature. A comparison with previous experimental results confirmed that the proposed model can be predicted relatively accurately with an average of 0.98 and a coefficient of variation of 12.1%.

【 授权许可】

Unknown