Modification of Mechanical and Electromechanical Resonances of Cellular Ferroelectret Films Depending on the External Load

Polymers

Tomás Gómez Álvarez-Arenas¹  Julio Quirce Aguilar¹ 

[1] ITEFI-CSIC, Serrano 144, 28006 Madrid, Spain;

关键词: cellular polymers;    ferroelectrets;    thickness resonances;    piezoelectric polymers;    ultrasonic transduction;   

DOI  :  10.3390/polym13193239

来源: DOAJ

【 摘 要 】

Ferroelectret films are cellular polymers with electrically charged pores that exhibit piezoelectric response. Among other applications, ferroelectret films have been widely used as active elements in air-coupled ultrasonic transducers. More recently, they have also been tested in water immersion. They show a promising wide frequency band response, but a poor sensitivity produced by the disappearance of the electromechanical resonances. This paper studies in detail the modification of FE films response when put into water immersion, both the mechanical and the electromechanical responses (the latter in transmission and reception modes). The lack of electromechanical thickness resonances when the films are put into water is explained as the result of the different profile of the modification of the polarization vector along the film thickness imposed by the large mechanical load produced by the water. This different electromechanical response can also be the reason for the subtle modification of the mechanical thickness resonances that is also observed and analyzed.

【 授权许可】

Unknown