Design and Optimization of a Low-Resonant-Frequency Piezoelectric MEMS Energy Harvester Based on Artificial Intelligence

Proceedings

Lihong Zhang¹ 

[1] Department of Electrical and Computer Engineering, Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL A1B 3X9, Canada;

关键词: low-resonant-frequency;    MEMS harvester;    piezoelectric;    deep neural networks;    artificial intelligence;    genetic algorithm;    design automation;   

DOI  :  10.3390/proceedings2130930

来源: DOAJ

【 摘 要 】

In this study we propose a piezoelectric MEMS vibration energy harvester with the capability of oscillating at low (i.e., less than 200 Hz) resonant frequency. The mechanical structure of the proposed harvester is comprised of a doubly clamped cantilever with a serpentine pattern associated with several discrete masses. In order to obtain the optimal physical aspects of the harvester and speed up the design process, we have utilized a deep neural network, as an artificial intelligence (AI) method. Firstly, the deep neural network was trained with 108 data samples gained from finite element modeling (FEM). Then this trained network was integrated with the genetic algorithm (GA) to optimize geometry of the harvester to enhance its performance in terms of resonant frequency and generated voltage. Our numerical results confirm that the accuracy of the network in prediction is above 90%. Consequently, by taking advantage of this efficient AI-based performance estimator, the GA is able to reduce the device operational frequency from 169 Hz to 110.5 Hz and increase its efficiency on harvested voltage from 2.5 V to 3.4 V under 0.25 g excitation.

【 授权许可】

Unknown