Meta-Structure Surface Based on Dielectric Tensor Rotation Induced by AC Electric Field for Insulation Improvement

Frontiers in Materials

Zhenyu Xin¹  Zhidong Jia¹  Zikui Shen¹  Xilin Wang¹  YanPeng Hao² 

[1] Engineering Laboratory of Power Equipment Reliability in Complicated Coastal Environment, Shenzhen International Graduate School (SIGS), Tsinghua University, Shenzhen, China;School of Electric Power Engineering, South China University of Technology, Guangzhou, China;

关键词: self-assembly;    electric polarization;    dielectric tensor;    surface insulation;    meta-surface;    functional gradient material;   

DOI  :  10.3389/fmats.2022.877159

来源: DOAJ

【 摘 要 】

Electric field distribution along gas–solid interfaces determines the reliability of insulating components. However, the dielectric gradient insulating component prepared by the conventional method is considered to only control the internal electric field, but is not beneficial to the surface insulation, especially when the electrode is at an acute angle from the dielectric surface. The aim of this study is to clarify that the meta-structure surface based on dielectric tensor rotation constructed by the electric field-induced assembly (EIA) method could improve surface insulation. The self-assembly and orientation axis rotation of filler particles near the interface were observed by in-situ optical observation, and the relationship between the dielectric tensor rotation and electric field refraction was revealed. Simulation of meta-structure surface induced by the EIA method on the basin insulator was conducted. The meta-structure surface exhibits negative and high reduced permittivity, confining electric field path and transferring the electrical stress from gas to insulator, which offers theoretical support to optimize the surface electric field. Flashover tests on the basin insulator proved the insulation improvement by meta-structure surface.

【 授权许可】

Unknown