International Journal for Simulation and Multidisciplinary Design Optimization | |
Effect of face width of spur gear on bending stress using AGMA and ANSYS | |
关键词: spur gear; auto cad; ansys; face width; agma; von-mises stress; | |
DOI : 10.1051/smdo/2020017 | |
来源: DOAJ |
【 摘 要 】
In the present analysis, the effect of face width on the bending strength of spur gear has been studied. For this purpose face width of spur gear has been varied from 20 mm to 30 mm with a scale of 2 mm. Geometry of spur gear has been drawn using AutoCAD and the gear model has been simulated for bending stress using analysis software (ANSYS).Analytical equations (AGMA bending equations) have been used to find out analytical solution. Bending stress has been calculated at the gear tooth for different values of load. The simulation results have been compared with analytical solutions obtained using AGMA equations. It has been found from the results that increase in face width of spur gear results in decrease in bending stress and hence increase in bending strength.
【 授权许可】
Unknown