Sintering Reaction and Pyrolysis Process Analysis of Al/Ta/PTFE

Polymers

Jun Zhang¹  Jiaxiang Wu¹  Zhenru Gao¹  Qiang Liu¹  Shuangzhang Wu¹  Junyi Huang¹  Zhongshen Yu¹  Yuchun Li¹  Jiaying Kui¹  Jiaxing Song¹ 

[1] College of Field Engineering, PLA Army Engineering University, Nanjing 210007, China;

关键词: Al/Ta/PTFE;    sintering reaction;    TG-DSC;    XRD;    TaF₃;   

DOI  :  10.3390/polym11091469

来源: DOAJ

【 摘 要 】

When the Al/Ta/PTFE reactive material was sintered at 360 °C in a vacuum sintering furnace, it was found that the material reacted to form a soft fluffy white substance and carbon black. To explore the reaction process further, powder samples of pure PTFE, Al/PTFE, Ta/PTFE and Al/Ta/PTFE, and molded cylindrical specimens were prepared. A TG-DSC test was carried out on the thermal reaction of four reactive materials, and XRD phase analysis was conducted on the white product, formed by the sintering reaction and the residue of the TG-DSC test sample, based on which of the pyrolysis processes and reaction mechanisms were analyzed. The results show that Ta and PTFE could have a chemical reaction at sintering temperature (360 °C) to form soft and fluffy white material TaF₃ and carbon black, which can overflow the surface of the specimen and cause cracking of the specimen, which is tightly pressed. Since no obvious exothermic peak showed up on the TG-DSC curve, the composition of the residue of TG-DSC sample at different temperatures was tested and TaF₃ was detected in the residue at 350 °C and 360 °C, indicating that Ta began to react with PTFE at a temperature range of 340−350 °C. According to the chemical properties and product formation of Ta, it could be speculated that the reaction mechanism between Ta and PTFE involves the PTFE decomposing first, then the fluorine-containing gas product reacting with metal Ta. According to the temperature range of the reaction, it is estimated that PTFE starts to decompose before 500 °C, but it is not detected effectively by TG-DSC, and the introduction of Ta could also affect the decomposition process of PTFE.

【 授权许可】

Unknown