Development of a Remote Displacement Measuring Laser System for Bridge Inspection

Sensors

Kyung-Hwa Kim¹  Hwee-Kwon Jung¹ 

[1] Intelligent Photonic IoT Research Center, Korea Photonics Technology Institute, 9, Cheomdan Venture-ro 108beon-gil, Buk-gu, Gwangju 61007, Korea;

关键词: laser system;    laser sensor;    displacement measurement;    safety inspection;    bridges;   

DOI  :  10.3390/s22051963

来源: DOAJ

【 摘 要 】

Measuring displacement is essential for assessing the safety of bridges. Non-contact sensors such as vision sensors can precisely measure displacement but may be expensive or incapable of micro-scale measurement at a low cost, unlike contact displacement sensors, which are economical but challenging to install. This study proposes an economical, remote non-contact sensor system. The system comprises a laser beam transmitter and a light receiver, deriving the displacement based on the position where the laser beam is irradiated to the light-receiving surface. To measure this, the light receiver was installed at the measurement point and included a wireless communicator to transmit the displacement data. A displacement experiment was conducted to evaluate the performance. The results confirmed that precise displacement measurements were possible at a resolution of 100 µm. For bridge load tests, a light receiver under a bridge was installed, laser beams irradiated to the light-receiving surface from a distance, and the displacement was measured for each test and compared with the values measured by a conventional contact sensor. The results were highly consistent with those of the existing sensor, indicating that the proposed sensor system applies to bridge loading tests and the safety diagnosis for various structures.

【 授权许可】

Unknown