Tribological Examination of Different Steel Materials after Special Heat Treatment and Salt Bath Nitriding

Archives of Metallurgy and Materials

Rostek E.¹  Klasik A.¹  Mazuro P.²  Opaliński M.² 

[1] Motor Transport Institute, 80 Jagielońska Str., 03-301 Warszawa, Poland;Warsaw University of Technology, Institute of Heat Engineering, 21/25 Nowowiejska Str., 00-665 Warszawa, Poland;

关键词: tribology;    mechanical properties;    steel alloys;    friction coefficient;   

DOI  :  10.1515/amm-2016-0303

来源: DOAJ

【 摘 要 】

The main aim of the presented research was examination of new tribological pairs made of different types of steel. Materials of disc probes were submitted to unusual heat treatment processes and salt bath nitriding. The research is focused on the friction coefficients and mass losses of the material probes. Based on the results it was noticed that the best wear resistant pair was bearing steel 100Cr6 coupled with high speed steel S705. The lowest friction coefficient appeared for the pair bearing steel 100Cr6 and maraging steel C350.

【 授权许可】

Unknown