FRICTION COEFFICIENT OF DIAMOND WIRE SAW

Rudarsko-geološko-naftni Zbornik

Siniša Dunda¹ 

[1] Faculty of Mining, Geology and Petroleum Engineering, University of Zagreb, Pierottijeva 6, Zagreb, Croatia;

关键词: dimension stone;    diamond wire sawing plant;    coefficient of friction;   

DOI  :  

来源: DOAJ

【 摘 要 】

In order to estimate the diamond wire saw upon quarrying of dimension stone, it is necessary to know the value of a friction coefficient on the driving pulley of the saw. Therefore the numerical value of the friction coefficient between diamond wire and coating of a driving pulley was determined in experimental way. The experiments were conducted under different working conditions. The resulting average value of the friction coefficient upon working in wet and muddy conditions amounted to µ = 0,32.

【 授权许可】

Unknown