Design of twisted tape turbulator at different entrance angle for heat transfer enhancement in a solar heater

Beni-Suef University Journal of Basic and Applied Sciences

Himadri Chattopadhyay¹  Suvanjan Bhattacharyya²  Ayan Haldar² 

[1] Department of Mechanical Engineering, Jadavpur University, Kolkata 700032, India;Department of Mechanical Engineering, MCKV Institute of Engineering, Howrah 711204, India;

关键词: Heat transfer;    Enhancement;    Twisted tape;    Entrance angle;    Turbulent flow;   

DOI  :  10.1016/j.bjbas.2017.08.003

来源: DOAJ

【 摘 要 】

Numerical investigation of heat transfer characteristics in a tube fitted with inserted twisted tape swirl generator is performed. The twisted tapes are separately inserted from the tube wall. The configuration parameters include the, entrance angle (α) and pitch (H). Investigations have been done in the range of α = 180°, 160° and 140° with Reynolds number varying between 100 and 20,000. In this paper, transition – SST model which can predict the transition of flow regime from laminar through intermittent to turbulent has been utilized for numerical simulations. The computational results are in good agreement with experimental data. The results show that higher entrance angle yields a higher heat transfer value. The using of single twist twisted tape supplies considerable increase on heat transfer and pressure drop when compared with the conventional twisted tapes. A large data set has been generated for heat transfer and thermal-hydraulic performance which is useful for the design of solar thermal heaters and heat exchangers.

【 授权许可】

Unknown