The effects of disassembled type connection elements moment capacity in furniture corner joints

Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi

关键词: Wood composite material;    Corner joint;    Metal T connector;    Connector Fitting;    Plastic T connector;   

DOI  :  10.17474/artvinofd.409500

来源: DOAJ

【 摘 要 】

In this study, the effects on the moment capacity of demountable fasteners used in furniture corner joints were investigated. Experimental specimens were prepared from wood based composite boards, synthetic resin coated particle board (YL-Lam) and fibre boards (MDF-Lam). Four different types of fasteners (metal L, plastic T, metal T and corner fitting) were used. The test specimens were subjected to compression and tensile testing under static loads, taking into account the critical loads that they could experience under their use. According to the test results, the diagonal compression test moment carrying capacity value; the highest value for the type of fasteners was observed in the test samples combined with the metal L connector, while the lowest value was determined in the test samples combined with the corner fitting. In the diagonal tension of wood-based composite board-connector element type interaction; the highest value was determined in the samples prepared MDF-Lam with the metal L connector, while the lowest value was observed in the test samples prepared YL-Lam with the corner fitting. In the light of these data, the combination of MDF-Lam with metal L connector can be applied to the furniture elements corner joints.

【 授权许可】

Unknown