Implementasi Jaringan Sensor Nirkabel Menggunakan Zigbee pada Monitoring Tabung Inkubator Bayi

Jurnal Nasional Teknik Elektro

Fathur Zaini Rachman¹ 

[1] Jurusan Teknik Elektronika, Politeknik Negeri Balikpapan;

关键词: Sensor module;    wirelessnetwork;    Human Machine Interface;   

DOI  :  10.20449/jnte.v5i2.221

来源: DOAJ

【 摘 要 】

Implementation of wireless sensor networks using zigbee to facilitate communication between users (nurse) with systems that operate on tube baby incubator. In addition, nurses can always monitor the condition of tube baby incubator at the nursing station. In this study consists of three main parts, the first sensor module using SHT11 as detection of temperature and humidity tube baby incubator, the second wireless network using ZigBee as a medium of communication between the sensor module with a computer, a third HMI (Human Machine Interface) on the computer as a data processor which received from each sensor module scattered. The results of this study found that the system can work properly with a star topology, so communication was very good when applied to the scope of which is still to reach by the end device and the coordinator. As for the broader scope can use a mesh topology to add a router at the point range.

【 授权许可】

Unknown