A Study on Two-Stage Cold Forging for a Drive Shaft with Internal Spline and Spur Gear Geometries

Metals

Tae-Wan Ku¹ 

[1] Engineering Research Center of Innovative Technology on Advanced Forming, Pusan National University, Geumjeong-gu, Busan 46241, Korea;

关键词: drive shaft;    internal spline;    spur gear;    cold forging;    process design;    forward extrusion;    forward-backward extrusion;   

DOI  :  10.3390/met8110953

来源: DOAJ

【 摘 要 】

A two-stage cold forging process was proposed to manufacture a drive shaft with an internal spline and spur gear geometries, and this process was mainly composed of a forward extrusion for preform and a forward-backward extrusion for the drive shaft. In the process design, the preform was designed using a volume apportioning scheme from the required target shape, thereafter, the initial round billet was outlined. AISI 1035 carbon steel was selected as the raw material, and a spheroidizing heat treatment was adopted. Using the raw and spheroidizing annealed workpieces, uni-axial tensile and compression tests were carried out to evaluate the effect of the heat treatment and to measure the mechanical properties. Finite element simulations were sequentially performed to assure the suitability of the proposed process design. Considering the results from the process design and the numerical simulations, the related tool components were prepared and applied to a series of experimental investigations. The preform and the drive shaft fabricated by the two-stage cold forging experiments were compared with the required target and the numerically predicted configurations. The results indicated that the two-stage cold forging process proposed in this study could be well applied to the production of the drive shaft with an internal spline and spur gear structures.

【 授权许可】

Unknown