The Design and Calibration of Instrumented Particles for Assessing Water Infrastructure Hazards

Journal of Sensor and Actuator Networks

Manousos Valyrakis¹  Khaldoon Al-Obaidi¹  Yi Xu¹ 

[1] Water Engineering Lab, School of Engineering, University of Glasgow, Glasgow G12 8QQ, UK;

关键词: inertial sensor fusion;    instrumented particle;    MEMS;    sediment entrainment;    sensor calibration;    frequency of entrainment;   

DOI  :  10.3390/jsan9030036

来源: DOAJ

【 摘 要 】

The highly dynamical entrainment and transport processes of solids due to geophysical flows is a major challenge studied by water infrastructure engineers and geoscientists alike. A miniaturised instrumented particle that can provide a direct, non-intrusive, low-cost and accessible method compared to traditional approaches for the assessment of coarse sediment particle entrainment is developed, calibrated and tested. The instrumented particle presented here is fitted with inertial microelectromechanical sensors (MEMSs), such as a triaxial accelerometer, a magnetometer and angular displacement sensors, which enable the recording of the particle’s three-dimensional displacement. The sensor logs nine-axis data at a configurable rate of 200–1000 Hz and has a standard mode of deployment time of at least one hour. The data can be obtained and safely stored in an internal memory unit and are downloadable to a PC in an accessible manner and in a usable human-readable state. A plethora of improved design specifications have been implemented herein, including increased frequency, range and resolution of acceleration and gyroscopic sensing. Improvements in terms of power consumption, in comparison to previous designs, ensure longer periods of data logging. The embedded sensors are calibrated using simple physical motions to validate their operation. The uncertainties in the experiments and the sensors’ readings are quantified and an appropriate filter is used for inertial sensor fusion and noise reduction. The instrumented particle is tested under well-controlled lab conditions, where the beginning of the destabilisation of a bed surface in an open channel flow, is showcased. This is demonstrative of the potential that specifically designed and appropriately calibrated instrumented particles have in assessing the initiation and occurrence of water infrastructure hazards.

【 授权许可】

Unknown