Application of a Thermal Performance-Based Model to Prediction Energy Consumption for Heating of Single-Family Residential Buildings

Energies

Tomasz Szul¹ 

[1] Faculty of Production and Power Engineering, University of Agriculture, 30-149 Krakow, Poland;

关键词: energy efficiency;    energy consumption;    forecasting of energy consumption;    single-family residential buildings;   

DOI  :  10.3390/en15010362

来源: DOAJ

【 摘 要 】

Energy consumption for heating of single-family residential buildings is a basic item in energy balance and significantly affects their operating costs. Accuracy of heat consumption assessment in existing buildings to a large extent determines the decision on taking actions aimed at heat consumption rationalization, both at the level of a single building and at regional or national level. In the case of energy calculations for the existing buildings, a problem often arises in the form of lack of complete architectural and construction documentation of the analyzed objects. Therefore, there is a need to search for methods that will be suitable for rapid energy analysis in existing buildings. These methods should give satisfactory results in predicting energy consumption when there is limited access to data characterizing the building. Therefore, the aim of this study was to check the usefulness of a model based on thermal characteristics for estimating energy consumption for heating in single-family residential buildings. The research was conducted on a group of 84 buildings, for which the energy characteristics were determined based on the actual energy consumption. In addition, information was collected on variables describing these buildings in terms of construction technology and building geometry, from which the following were extracted for further calculations: cubic capacity, heated area, and year of construction. This made it possible to build a prediction model, which enables the application of a fast, relatively simple procedure of estimating the final energy demand index for heating buildings. The resulting calculations were compared with actual values (calculated from energy bills) and then evaluated according to the standards for evaluating model quality proposed by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). In this way, it was possible to determine whether, in the absence of building documents, the indicative method gives good results when estimating the energy demand for heating single-family residential buildings.

【 授权许可】

Unknown