Investigation of Stress Status in the Micro-Space of Surface and Subsurface Layer

Communications

Vitor Luiz Sordi¹  Zdenka Rysava²  Robert Cep³  Andrej Czan⁴  Michal Sajgalik⁴  Lucia Zauskova⁴ 

[1] Departamento de Engenharia de Materiais, Brasil;Departement of Industrial Engineering, University of Padua, Italy;Department of Machining and Assembly, Faculty of Mechanical Engineering, VSB -Technical University of Ostrava, Czech Republic;Department of Machining and Manufacturing Technology, Faculty of Mechanical Engineering, University of Zilina, Slovakia;

关键词: x-ray diffractometry;    residual stress;    stress tensor;    microstructure;   

DOI  :  10.26552/com.C.2017.2A.112-116

来源: DOAJ

【 摘 要 】

One of main issues when evaluating or analysing quality and functional properties of work-piece is identification of status of residual stress. Every treatment or machining process generates residual stress in the surface and subsurface layers of the material structure. The residual stress has a large influence on the functional properties of the components. The article is focused on the method of triaxial measurement of residual stress after machining the surface of sample by high feed milling technology. Significance of triaxial measuring is the capability of measuring in different angles so it is possible to acquire stress tensor containing normal and shear stress components acting in the spot of measuring, using a Cartesian coordinate system.

【 授权许可】

Unknown