Non-Isolated Interleaved Hybrid Boost Converter for Renewable Energy Applications

Energies

Naomitsu Urasaki¹  Girish Ganesan Ramanathan² 

[1] Faculty of Engineering and Science, University of the Ryukyus, Nishihara-cho 903-0129, Okinawa, Japan;Graduate School of Engineering and Science, University of the Ryukyus, Nishihara-cho 903-0129, Okinawa, Japan;

关键词: high gain;    interleaved;    DC-DC converter;    renewable energy;    voltage lift capacitor;   

DOI  :  10.3390/en15020610

来源: DOAJ

【 摘 要 】

DC-DC boost converters are necessary to extract power from solar panels. The output voltage from these panels is far lower than the utility voltage levels. One of the main functions of the boost converter is to provide a considerable step-up gain to interface the panel to the utility lines. There are several techniques used to boost the low panel voltage. Some of the issues faced by these topologies are a high duty ratio operation, complex design with multiple active switches and discontinuous input current that affects the power drawn from the panel. This paper presents a boost converter topology that combines the advantages of an interleaved structure, a voltage lift capacitor and a passive voltage multiplier network. A mathematical analysis of the proposed converter during its various modes of operation is presented. A 100 W prototype of the proposed converter is designed and tested. The prototype is controlled by a PIC16F18455 microcontroller. The converter is capable of achieving a gain of 10 without operating at extremely high duty ratios. The voltage stress of the switch is far lower than the maximum output voltage.

【 授权许可】

Unknown