Determination of the Surface Roughness Values of Turkish Red Pine (Pinus brutia (Ten.)) Woods

BioResources

Murat Kılıç¹ 

[1] Kırıkkale University;

关键词: Surface roughness;    Turkish red pine;    Pinus brutia Ten woods;    Wood machining;    Cutting directions;   

DOI  :  10.15376/biores.12.1.1216-1227

来源: DOAJ

【 摘 要 】

The aim of this study was to determine the surface roughness values of Turkish red pine samples obtained from the seven natural growth areas in Turkey. The samples were cut with a circular saw, planed with a thickness machine, and sanded with a sanding machine (with No. 80 sandpaper). After the samples were processed as radial and tangential surfaces in the machines, their surface roughness values (Ra, Ry, and Rz) were measured in accordance with ISO 4288 (1996). According to the statistical results, the lowest surface roughness values were in the samples obtained from the Muğla and Samsun areas on the tangential surfaces that were processed with the thickness machine.

【 授权许可】

Unknown