Synthesis and Characterization of Hybrid Fiber-Reinforced Polymer by Adding Ceramic Nanoparticles for Aeronautical Structural Applications

Polymers

Walaa Abd-Elaziem¹  Walid Mahmoud Shewakh²  Omar Talal Bafakeeh²  Mohamed Abu-Okail³  Metwally Abdel Ghafaar³  Ahmed Abu-Oqail⁴ 

[1] Department of Mechanical Design and Production Engineering, Faculty of Engineering, Zagazig University, Zagazig P.O. Box 44519, Egypt;Industrial Engineering Department, Faculty of Engineering, Jazan University, Jazan P.O. Box 114, Saudi Arabia;Manufacturing Engineering and Production Technology Department, Modern Academy for Engineering and Technology, Cairo P.O. Box 11571, Egypt;Mechanical Production Department, Faculty of Technology Education, Beni-Suef University, Beni-Suef P.O. Box 62521, Egypt;

关键词: aeronautical structural applications;    hybrid fibers reinforced polymer;    composites;    mechanical response;    structural behavior;   

DOI  :  10.3390/polym13234116

来源: DOAJ

【 摘 要 】

The multiscale hybridization of ceramic nanoparticles incorporated into polymer matrices reinforced with hybrid fibers offers a new opportunity to develop high-performance, multifunctional composites, especially for applications in aeronautical structures. In this study, two different kinds of hybrid fibers were selected, woven carbon and glass fiber, while two different ceramic nanoparticles, alumina (Al₂O₃) and graphene nanoplatelets (GNPs), were chosen to incorporate into a polymer matrix (epoxy resin). To obtain good dispersion of additive nanoparticles within the resin matrix, the ultrasonication technique was implemented. The microstructure, XRD patterns, hardness, and tensile properties of the fabricated composites were investigated here. Microstructural characterization demonstrated a good dispersion of ceramic nanoparticles of Al₂O₃ and GNPs in the fabricated composites. The addition of GNPs/Al₂O₃ nanoparticles as additive reinforcements to the fiber-reinforced polymers (FRPs) induced a significant increase in the hardness and tensile strength. Generally, the FRPs with 3 wt.% nano-Al₂O₃ enhanced composites exhibit higher tensile strength as compared with all other sets of composites. Particularly, the tensile strength was improved from 133 MPa in the unreinforced specimen to 230 MPa in the reinforced specimen with 3 wt.% Al₂O₃. This can be attributed to the better distribution of nanoparticles in the resin polymer, which, in turn, induces proper stress transfer from the matrix to the fiber phase. The hybrid mode mechanism depends on the interaction among the mechanical properties of fiber, the physical and chemical evolution of resin, the bonding properties of the fiber/resin interface, and the service environment. Therefore, the hybrid mode of woven carbon and glass fibers at a volume fraction of 64% with additive nanoparticles of GNPs/Al₂O₃ within the resin was appropriate to produce aeronautical structures with extraordinary properties.

【 授权许可】

Unknown