A Sensor Fusion Method for Tracking VerticalVelocity and Height Based on Inertial and BarometricAltimeter Measurements

Sensors

Vincenzo Genovese¹  Angelo Maria Sabatini¹ 

[1] The BioRobotics Institute, Scuola Superiore Sant'Anna, Viale Rinaldo Piaggio, Pontedera 34 56025, Pisa, Italy;

关键词: sensor fusion;    inertial sensors;    barometric altimeters;    motion tracking;    Kalman filtering;   

DOI  :  10.3390/s140813324

来源: DOAJ

【 摘 要 】

A sensor fusion method was developed for vertical channel stabilization by fusing inertial measurements from an Inertial Measurement Unit (IMU) and pressure altitude measurements from a barometric altimeter integrated in the same device (baro-IMU). An Extended Kalman Filter (EKF) estimated the quaternion from the sensor frame to the navigation frame; the sensed specific force was rotated into the navigation frame and compensated for gravity, yielding the vertical linear acceleration; finally, a complementary filter driven by the vertical linear acceleration and the measured pressure altitude produced estimates of height and vertical velocity. A method was also developed to condition the measured pressure altitude using a whitening filter, which helped to remove the short-term correlation due to environment-dependent pressure changes from raw pressure altitude. The sensor fusion method was implemented to work on-line using data from a wireless baro-IMU and tested for the capability of tracking low-frequency small-amplitude vertical human-like motions that can be critical for stand-alone inertial sensor measurements. Validation tests were performed in different experimental conditions, namely no motion, free-fall motion, forced circular motion and squatting. Accurate on-line tracking of height and vertical velocity was achieved, giving confidence to the use of the sensor fusion method for tracking typical vertical human motions: velocity Root Mean Square Error (RMSE) was in the range 0.04–0.24 m/s; height RMSE was in the range 5–68 cm, with statistically significant performance gains when the whitening filter was used by the sensor fusion method to track relatively high-frequency vertical motions.

【 授权许可】

Unknown