Development of Magnetostrictive Transducer Prototype for Blockage Detection on Molten Salt Pipes

Energies

Pedro J. Villegas¹  Juan A. Martín-Ramos¹  Alberto M. Pernía¹  Miguel J. Prieto¹  Héctor Andrés-Mayor¹  Fernado Nuño¹ 

[1] Department of Electrical Engineering, University of Oviedo, 33203 Gijón, Asturias, Spain;

关键词: guided waves;    torsional waves;    magnetostriction;    electromagnetic acoustic transducer;    electromagnetic acoustic transducer (EMAT);    nondestructive testing;    nondestructive testing (NDT);    solar power plant;   

DOI  :  10.3390/en11030587

来源: DOAJ

【 摘 要 】

In solar thermal power plants molten salt is often used to store and transport the energy that is collected during the day. The external pipe temperature is measured to activate an electric heating system if the temperature approaches the melting point. However, salt solidification cannot be completely excluded from the plant management. Once occurred, the location of a salt blockage is very complex due to the high temperature of the pipe. Therefore, when this problem arises, power plants have to stop production with the consequences in time and cost that this entails. Electro-magnetic acoustic transducers can be used as non-destructive testing systems for this application. A method for salt blockage detection is proposed that is applicable in straight sections of pipes by employing torsional guided waves that are generated with magnetostrictive transducers. The present paper deals with the transducer conception and the design of the power supply to activate it. Two alternatives are proposed and compared to determine the improvement in the amplitude/noise ratio. Finally, the experimental results show the performance of the equipment in a small prototype, thus validating the technique presented.

【 授权许可】

Unknown