Improved technique for the earthquake proof suspension building

Journal of Measurements in Engineering

Taliat Azizov¹  Nadzieja Jurkowska² 

[1] Pavlo Tychyna Uman State Pedagogical University, Uman, Ukraine;Tadeusz Kosciuszko Cracow University of Technology, Krakow, Poland;

关键词: seismic safety;    suspension building;    cantilever building;    horizontal dynamic forces;   

DOI  :  10.21595/jme.2018.20411

来源: DOAJ

【 摘 要 】

This paper presents the refined technique of dynamic calculations for suspension earthquake-resistant building. The improved design schemes of suspension buildings and structures have been demonstrated. Two versions of suspension buildings have been analysed. For the system with the building as a point mass suspension on the fixed bearing frame thread, a system of Lagrange differential equations of the second kind has been derived. For the building presented as a rigid rod with the length equal to its height, also suspended on the supporting frame, the solution is performed using principles of dynamic calculations and methods of theoretical mechanics. It has been demonstrated, that the horizontal force in the suspension building is ten times less than the force in a traditional cantilever building, and that for the real horizontal stiffness of the supporting frame the dynamic strains are far from resonant values. The possibility of adjusting dynamic forces by regulating the stiffness of the supporting frame, length of the thread of suspension and other parameters. The proposed calculation schemes are useful for the preliminary calculations, and the finite design of the suspension building can be performed in modern software packages (e.g., Ansys, Abacus, etc.).

【 授权许可】

Unknown