Simulation Model of Airport Security Lanes with Power Consumption Estimation

Energies

Tomasz Kisiel¹  Artur Kierzkowski¹  Piotr Uchroński² 

[1] Department of Technical Systems Operation and Maintenance, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland;Department of Transport and Information Technology, WSB University, Zygmunta Cieplaka 1C, 41-300 Dąbrowa-Górnicza, Poland;

关键词: airport;    security control;    process management;    simulation modelling;    power consumption;   

DOI  :  10.3390/en14206725

来源: DOAJ

【 摘 要 】

The purpose of this paper was to develop a simulation model that allows simultaneous analysis of airport screening lane performance and power consumption per passenger served. These two issues have not yet been considered simultaneously in the scientific literature. So far, the focus has been placed on process performance. However, this paper shows, by performing an empirical study and applying the proposed model, that it is important to consider these two issues simultaneously. This will allow for the sustainable development of air transport. As a case study, three system configurations for single, dual and single fast screening lanes were analyzed. For each configuration, 3 different types of X-ray devices were checked, and the results were compared. The results showed that for example calculations with 2 million passengers handled per year, the gains could be as high as 4614 kWh/year. This article therefore shows that it is important to manage the process with power consumption in mind.

【 授权许可】

Unknown